Request Quote
  • Austenitic (Chrome Nickel)
  • Good Cold Working
  • Good Elongation in Full Hard Condition
  • Good Fatigue Life
  • High Strength to Weight Ratio
  • Work Hardens Readily - so is in demand in harder tempers
  • Not Heat-treatable for Hardening Purposes
  • Non-magnetic in Annealed Condition
  • Slightly Magnetic in Work-hardened Condition
  • Good Heat and Corrosion Resistance
  • Welds Easily
  • Solution Annealed by Cooling Rapidly from 2000°F in Air or Water.
Unit of Measure

Specifications

Material

 N/A Type 301 Stainless Steel

Shapeform

 N/A Coil & Strip

Thickness

 N/A 0.062 inches1.5748 mm

Maximum Coil Width

 N/A 24 inches

Strip Weight per Unit Area

 N/A 2.5891 lbs/ft²12.6399862 kg/m²

Weight

 N/A 5.17824 lbs/ft7.706256768 kg/m

Temper

 N/A Annealed

Nominal Composition

 N/A 0.03% Max. Sulphur 0.045% Max. Phosphorus 0.10% Nitrogen 0.15% Max. Carbon 1.00% Max. Silicon 16.00 to 18.00% Chrominum 2.00% Max. Manganese 6.00 to 8.00% Nickel

ASTM Specification

 N/A ASTM A240 ASTM A262 Prac E ASTM A480 ASTM A666 UNS S30100

Typical Mechanical Properties

Steel Alloy Group

 N/A Austenitic

Magnetic Properties

 N/A Non-Magnetic

Harden By

 N/A Cold Work

Corrosion Resistance

 N/A High

Hardness

 N/A Low to Med.

Strength

 N/A Low to Med.

Ductility

 N/A High

Toughness

 N/A High

Elec. Conductance

 N/A Low

Thermal Conductance

 N/A Low

Thermal Expansion

 N/A High

Heat Resistance (Scaling Strength)

 N/A High/High

Comparative Characteristics and Applications

Yield Strength

 N/A 43000 lbs/in²

Tensile Strength

 N/A 106000 lbs/in²

Elongation percent in 2 inches

 N/A 56 %

Hardness (Rockwell B)

 N/A 86

Density

 N/A 0.29 lbs/in³

Modulus of Elasticity in Tension

 N/A 28.0 x 106 lbs/in²

Specific Heat (32 to 212°F)

 N/A 0.12 BTU/ºF/lbs

Thermal Conductivity at 212°F

 N/A 9.4 BTU/hr.ft²/ft/ºF

Thermal Conductivity at 932°F

 N/A 12.4 BTU/hr.ft²/ft/ºF

Mean Coefficient of Thermal Expansion per °F (32 to 212°F)

 N/A 9.4 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 600°F)

 N/A 9.5 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1000°F)

 N/A 10.1 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1200°F)

 N/A 10.4 x 10-6 ºF

Melting Point Range

 N/A 2550 to 2590 ºF

Electrical Resistivity

 N/A 69 µΩ.cm

Max. Operating Temp. (Continuous Service)

 N/A 1600 ºF

Max. Operating Temp. (Intermittent Service)

 N/A 1500 ºF

Welding Properties

 N/A Very Good-Tough Welds

Drawing and Stamping

 N/A Good

Hot Working - Initial Forging

 N/A 2100 to 2300 ºF

Annealing Temp.

 N/A 1850 to 2050 ºF

Stress Relieving Temp.

 N/A 400 to 750 ºF

Applications

N/A

  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes