Aluminum Structural Channels American Standard

6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.

6061-T6
Stock Lengths 25' Tapered Flanges
AMS-QQ-A-200/16 (Except for Tolerances and Markings)
AMS-QQ-A-200/8
ASTM B308 UNS A96061

Unit of Measure

Items	6061-T6C-300-1410-170 Aluminum Structural Channels American Standard	6061-T6C-300-1498-258 Aluminum Structural Channels American Standard	6061-T6C-300-1596-356 Aluminum Structural Channels American Standard	6061-T6C-400-1580-180 Aluminum Structural Channels American Standard	6061-T6C-400-1647-247 Aluminum Structural Channels American Standard
Material	N/A Aluminum
Shapeform	N/A Structural Channels
Series	N/A 6061-T6
Grade	N/A 6061
Temper	N/A T6
Size	N/A 3 x 0.170 x 1.410 inches76.2 x 35.814 x 4.318 mm	N/A 3 x 0.258 x 1.498 inches76.2 x 38.0492 x 6.5532 mm	N/A 3 x 0.356 x 1.596 inches76.2 x 40.5384 x 9.0424 mm	N/A 4 x 0.180 x 1.580 inches101.6 x 40.132 x 4.572 mm	N/A 4 x 0.247 x 1.647 inches101.6 x 41.8338 x 6.2738 mm
Dimension A	N/A 3 inches	N/A 3 inches	N/A 3 inches	N/A 4 inches	N/A 4 inches
Dimension B	N/A 1.410 inches	N/A 1.498 inches	N/A 1.596 inches	N/A 1.580 inches	N/A 1.647 inches
Thickness	N/A 0.170 inches	N/A 0.258 inches	N/A 0.356 inches	N/A 0.180 inches	N/A 0.247 inches
Estimated Weight	N/A 1.418 lbs/ft2.110216552 kg/m	N/A 1.729 lbs/ft2.573035556 kg/m	N/A 2.070 lbs/ft3.08049948 kg/m	N/A 1.846 lbs/ft2.747150744 kg/m	N/A 2.163 lbs/ft3.218898732 kg/m
Estimated Weight per 25' Bar	N/A 35.450 lbs16.05885 kg	N/A 43.225 lbs19.580925 kg	N/A 51.750 lbs23.44275 kg	N/A 46.150 lbs20.90595 kg	N/A 54.075 lbs24.495975 kg
ASTM Specification	N/A AMS-QQ-A-200/16 AMS-QQ-A-200/8 ASTM B308 UNS A96061
Stock Length	N/A 25 ft
Flanges	N/A Tapered
Ultimate Strength	N/A 45 ksi
Yield Strength	N/A 40 ksi
Elongation percent in 2 inches	N/A 12
Hardness Brinnel Number	N/A 95
Ultimate Shearing Strength	N/A 30 ksi
Fatigue Endurance Limit¹	N/A 14 ksi
Modulus of Elasticity²	N/A 10.0 x 10³ ksi
Resistance to Corrosion - General³	N/A B
Stress Corrosion Cracking	N/A A
Workability (Cold)	N/A C
Mechinability	N/A C
Brazeability⁴	N/A A
Gas Weldability⁵	N/A A
Arc Weldability⁶	N/A A
Resistance Spot and Seam Weldability⁷	N/A A
Applications	N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density	N/A 0.098 lbs/in³
Specific Gravity	N/A 2.70
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Ratings A through D for Weldability and Brazeability are relative ratings. ⁵ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁶ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.