Aluminum Rectangles - Series 6061

6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required

6061-T6
Stock Lengths 12' (Sharp Corners)
ASTM B221 AMS4173

Unit of Measure

Items	6061-T6RE-250-8000 Aluminum Rectangles - Series 6061	6061-T6RE-250-10000 Aluminum Rectangles - Series 6061	6061-T6RE-250-12000 Aluminum Rectangles - Series 6061	6061-T6RE-375-8000 Aluminum Rectangles - Series 6061	6061-T6RE-375-10000 Aluminum Rectangles - Series 6061
Material	N/A Aluminum
Shapeform	N/A Rectangles
Series	N/A 6061-T6
Grade	N/A 6061
Temper	N/A T6
Size	N/A 1/4 x 8 inches	N/A 1/4 x 10 inches	N/A 1/4 x 12 inches	N/A 3/8 x 8 inches	N/A 3/8 x 10 inches
Working Decimal Equivalent	N/A 0.250 x 8.000 inches6.35 x 203.2 mm	N/A 0.250 x 10.00 inches6.35 x 254 mm	N/A 0.250 x 12.00 inches6.35 x 304.8 mm	N/A 0.375 x 8.000 inches9.525 x 203.2 mm	N/A 0.375 x 10.000 inches9.525 x 254 mm
Width	N/A 1/4 inches	N/A 1/4 inches	N/A 1/4 inches	N/A 3/8 inches	N/A 3/8 inches
Length	N/A 8 inches	N/A 10 inches	N/A 12 inches	N/A 8 inches	N/A 10 inches
Estimated Weight	N/A 2.3520 lbs/ft3.500161728 kg/m	N/A 2.940 lbs/ft4.37520216 kg/m	N/A 3.5280 lbs/ft5.250242592 kg/m	N/A 3.5280 lbs/ft5.250242592 kg/m	N/A 4.4100 lbs/ft6.56280324 kg/m
Estimated Weight per 12' Bar	N/A 28.224 lbs12.8021918976 kg	N/A 35.280 lbs16.002739872 kg	N/A 42.336 lbs19.2032878464 kg	N/A 42.336 lbs19.2032878464 kg	N/A 52.920 lbs24.004109808 kg
ASTM Specification	N/A AMS 4173 ASTM B221
Stock Length	N/A 12 ft
Ultimate Strength	N/A 45 ksi
Yield Strength	N/A 40 ksi
Elongation percent in 2 inches	N/A 12
Hardness Brinnel Number	N/A 95
Ultimate Shearing Strength	N/A 30 ksi
Fatigue Endurance Limit¹	N/A 14 ksi
Modulus of Elasticity²	N/A 10.0 x 10⁴ ksi
Resistance to Corrosion - General³	N/A B
Stress Corrosion Cracking⁴	N/A A
Workability (Cold)⁵	N/A C
Mechinability	N/A C
Brazeability⁶	N/A A
Gas Weldability⁷	N/A A
Arc Weldability⁸	N/A A
Resistance Spot and Seam Weldability⁹	N/A A
Applications	N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density	N/A 0.098 lbs/in³
Specific Gravity	N/A 2.70
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test. ⁵ Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit. ⁶ Ratings A through D for Weldability and Brazeability are relative ratings. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁸ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁹ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.