Continental Steel and Tube Company
Continental Steel and Tube Company
P.O. BOX 030040
Fort Lauderdale, FL, 33303
Phone: 954.332.2290
Fax: 954.332.2296
Email: Sales@ContinentalSteel.com
Website: www.continentalsteel.com
Print Back
2011 is the most free-machining of the common aluminum alloys. It also has excellent mechanical properties. Thus, it is widely used for automatic screw machine products in parts requiring extensive machining.

2011-T3
AMS-QQ-A-225/3 ASTM B211 UNS A92011
506451146-497007210-aluminum-round-bar
Unit of Measure
Items 506451146-497007210-aluminum-round-bar
2011-T3-125
Aluminum Rounds - Series 2011-T3 		506451146-497007210-aluminum-round-bar
2011-T3-187
Aluminum Rounds - Series 2011-T3 		506451146-497007210-aluminum-round-bar
2011-T3-2188
Aluminum Rounds - Series 2011-T3 		506451146-497007210-aluminum-round-bar
2011-T3-250
Aluminum Rounds - Series 2011-T3 		506451146-497007210-aluminum-round-bar
2011-T3-2813
Aluminum Rounds - Series 2011-T3
Material N/A Aluminum
Shapeform N/A Round
Series N/A 2011-T3
Grade N/A 2011
Temper N/A T3
Diameter N/A 1/8 inches N/A 3/16 inches N/A 7/32 inches N/A 1/4 inches N/A 9/32 inches
Diameter N/A 0.125 inches3.175 mm N/A 0.1875 inches4.7625 mm N/A 0.2188 inches5.55752 mm N/A 0.25 inches6.35 mm N/A 0.2813 inches7.14502 mm
Estimated Weight N/A 0.0150 lbs/ft0.022323 kg/m N/A 0.034 lbs/ft0.0505988 kg/m N/A 0.0460 lbs/ft0.0684572 kg/m N/A 0.060 lbs/ft0.089292 kg/m N/A 0.076 lbs/ft0.1131032 kg/m
Estimated Weight per 12' Bar N/A 0.180 lbs0.08154 kg N/A 0.406 lbs0.183918 kg N/A 0.552 lbs0.250056 kg N/A 0.721 lbs0.326613 kg N/A 0.913 lbs0.413589 kg
ASTM Specification N/A AMS-QQ-A-225/3 ASTM B211 UNS A92011
Ultimate Strength N/A 55 ksi
Yield Strength N/A 43 ksi
Elongation percent in 2 inches N/A 15
Hardness Brinnel Number N/A 95
Ultimate Shearing Strength N/A 32 ksi
Fatigue Endurance Limit1 N/A 18 ksi
Modulus of Elasticity2 N/A 10.2 x 102 ksi
Resistance to Corrosion - General3 N/A D
Stress Corrosion Cracking4 N/A D
Workability (Cold)5 N/A C
Mechinability N/A A
Brazeability6 N/A D
Gas Weldability7 N/A D
Arc Weldability8 N/A D
Resistance Spot and Seam Weldability9 N/A D
Applications N/A Screw machine products
Density N/A 0.102 lbs/in³
Specific Gravity N/A 2.83
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test.
  • 5 Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
  • 6 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 8 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 9 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.