Aluminum Sheet and Coil - Series 5052-H32

Unit of Measure

Items	5052-H32-020-36-C Aluminum Sheet and Coil - Series 5052-H32	5052-H32-020-36-96 Aluminum Sheet and Coil - Series 5052-H32	5052-H32-020-48-C Aluminum Sheet and Coil - Series 5052-H32	5052-H32-020-48-96 Aluminum Sheet and Coil - Series 5052-H32	5052-H32-020-48-120 Aluminum Sheet and Coil - Series 5052-H32
Material	N/A Aluminum
Shapeform	N/A Coil	N/A Sheets	N/A Coil	N/A Sheets	N/A Sheets
Series	N/A 5052-H32
Grade	N/A 5052
Temper	N/A H32
Finish	N/A Mill
Thickness	N/A 0.02 inches0.508 mm
Size	N/A 36 x Coil	N/A 36 x 96	N/A 48 x Coil	N/A 48 x 96	N/A 48 x 120
Width	N/A 36	N/A 36	N/A 48	N/A 48	N/A 48
Length	N/A	N/A 96	N/A	N/A 96	N/A 120
Sheet Weight per Unit Area	N/A 0.279 lbs/ft²1.362 kg/m²	N/A	N/A	N/A	N/A
Weight per Sheet	N/A	N/A 6.70 lbs0.304 kg	N/A	N/A 8.94 lbs4.055 kg	N/A 11.17 lbs5.067 kg
Coil Weight per Length	N/A 0.838 lbs/ft1.247 kg/m	N/A	N/A 1.117 lbs/ft1.662 kg/m	N/A	N/A
ASTM Specification	N/A AMS 4016 AMS-QQ-A-250/8 ASME SB-209 ASTM B209
Ultimate Strength	N/A 33 ksi
Yield Strength	N/A 28 ksi
Elongation percent in 2 inches	N/A 12
Hardness Brinnel Number	N/A 60
Ultimate Shearing Strength	N/A 20 ksi
Fatigue Endurance Limit¹	N/A 17 ksi
Modulus of Elasticity²	N/A 10.2 x 10² ksi
Resistance to Corrosion - General³	N/A A
Stress Corrosion Cracking⁴	N/A A
Workability (Cold)⁵	N/A B
Mechinability	N/A D
Brazeability⁶	N/A C
Gas Weldability⁷	N/A A
Arc Weldability⁸	N/A A
Resistance Spot and Seam Weldability⁹	N/A A
Applications	N/A Sheet metal work, hydraulic tube, appliances
Density	N/A 0.097 lbs/in³
Specific Gravity	N/A 2.68
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test. ⁵ Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit. ⁶ Ratings A through D for Weldability and Brazeability are relative ratings. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁸ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁹ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.